Diagram of adjustment depth of cutter of ZOTA tube printer
2024年5月10日
In the process of using the ZOTA tube printer, frequent changes of printing materials can
SERVICE SUPPORT
Prinier
Plastic substrate
Plastic derivatives
What should I do if the automatic loading of ZOTA tube printer consumables fails
2024年5月10日
This prompt can be caused by incorrect installation of the sleeve adjuster or stains on
When will the density of the tube printer be adjusted?
2024年5月10日
The concentration range of the tube printer is between 1-7, and the factory setting of
How to install and disassemble the cutter set of CP819 tube printer
2024年5月10日
The tube printer cutter set is a set of parts that can automatically perform half
How to set the cutting length for ZOTA tube printer
2024年5月10日
When installing wire number tubes in integrated wiring projects, locomotives, and lathe control rooms, wire
How to use ZOTA CP819 tube printer serial number
2024年5月10日
The serial number function of ZOTA CP819 tube printer can be easily edited to batch
The serial number function of ZOTA CP819 tube printer can be easily edited to batch generate numerical serial numbers.
When installing wire number tubes in integrated wiring projects, locomotives, and lathe control rooms, wire numbers within a fixed length range are often required.
The concentration range of the tube printer is between 1-7, and the factory setting of the machine is generally 3 or 4.
This prompt can be caused by incorrect installation of the sleeve adjuster or stains on the outlet detection photoelectric sensor in the tube printer.
In the process of using the ZOTA tube printer, frequent changes of printing materials can easily lead to differences in the default half-cut depth of the half-cut.
